Contact Person:Dale McCarthy
PNG Number: 7100 0170
Email: ctmel.dale@gmail.com
Contact Person: Ken Wang
Email: kwang@ctmel.com
| 1 | Machine Parameters | ||
| Machine Main Parameters | |||
| Operating weight (standard configuration, excluding blade &ripper) | kg | 13500±150 | |
| Max. Draw Bar Pull | kN | ≥70 | |
| Wheelbase | mm | 5900±20 | |
| Minimum Turning Radius | mm | 7300±200 | |
| Max. grade ability | % / ° | 36/20 | |
| Wheel tread | mm | 2110±50 | |
| Maximum Travel Speed, fwd 1 | km/h | 5 | |
| Maximum Travel Speed, fwd 2 | km/h | 8 | |
| Maximum Travel Speed, fwd 3 | km/h | 13 | |
| Maximum Travel Speed, fwd 4 | km/h | 20 | |
| Maximum Travel Speed, fwd 5 | km/h | 29 | |
| Maximum Travel Speed, fwd 6 | km/h | 41 | |
| Maximum Travel Speed, rev 1 | km/h | 5 | |
| Maximum Travel Speed, rev 2 | km/h | 13 | |
| Maximum Travel Speed, rev 3 | km/h | 29 | |
| Cutting Pressure | kg | ≥6750 | |
| 2 | Transport parameters | ||
| 2.01 | DIMENSIONS(standard configuration) | mm | 8400x2470x3350 |
| DIMENSIONS(mouldboard) | mm | 9147x2740x3350 | |
| DIMENSIONS(ripper) | mm | 9350x2470x3350 | |
| DIMENSIONS(mouldboard&ripper) | mm | 10125x2740x3350 | |
| 2.02 | Accessory parameters | ||
| Mouldboard | |||
| Width | mm | 2740 | |
| Ripping depth | mm | 205 | |
| lifting depth | mm | 500 | |
| DIMENSIONS | mm | 2740X1815X1085 | |
| ripper | |||
| Width | mm | 2083 | |
| Ripping depth | mm | 308 | |
| lifting depth | mm | 393 | |
| Dimension | mm | 2083X1700X1500 | |
| SCARIFIER | |||
| Width | mm | 1655 | |
| Ripping depth | mm | 150 | |
| lifting depth | mm | 250 | |
| Dimension | mm | 2200X1655X600 | |
| Counter weight | |||
| front | kg | 560(0,+15) | |
| rear | kg | / | |
| 3 | Part parameters | ||
| 3.01 | power system | ||
| Engine Model | DONGFENG Cummins 6BTAA5.9-C150 | ||
| rated power | kW | 112 | |
| rated speed | r/min | 2200 | |
| Maximum Torque | N.m | 670 | |
| 3.02 | Transmission | ||
| Forward/Reverse Gears | 6/3 | ||
| Transmission Type | 定轴式动力换档 | ||
| 3.03 | Rear Axle | ||
| Axle Oscillation | ° | 15 | |
| 3.04 | Front Axle | ||
| Steering Angle | º | ±50 | |
| Front Axle, Wheel Lean Angle | º | ±17 | |
| Front Axle Oscillation | º | ±15 | |
| Clearance under Front Axle | mm | 535 | |
| 3.05 | TIRES | ||
| Tire type | 13.00-24 | ||
| 3.06 | HYDRAULIC SYSTEM | ||
| Main Pump System | |||
| Main Pump Type | Gear pump | ||
| Rated Pressure | Mpa | 21 | |
| Maximum Flow | L/min | 132 | |
| Steering system | |||
| Pump type | Gear pump | ||
| Maximum Flow | L/min | 66 | |
| System pressure | Mpa | 16.7±0.5 | |
| Brake system | |||
| Pump type | Gear pump | ||
| Maximum Flow | L/min | 66 | |
| System pressure | Mpa | 12.8~15.9 | |
| 3.07 | Working device | ||
| Moldboard Standard Length X Width X Thickness | mm | 3660x610x19 | |
| Moldboard Lift Above Ground | mm | 450 | |
| Cutting Depth | mm | 600 | |
| Maximum Sloping Angle | ° | 90 | |
| Circle Rotation | ° | 360 | |
| Moldboard Side Shift, left /right | mm | 482/670 | |
| Circle Diameter | mm | 1265 |
